GTechniq EXO EXOv2 Ultra Durable Hybrid Coating 30ml Sealant Detailing Car Van

GTechniq EXO EXOv3 Ultra Durable Hybrid Coating 30ml Sealant Detailing Car Van

Product Code: gt-exov230ml
Stock Status: In Stock
£43.90

Product Information

GTechniq  EXOv3 offers sensational surface functionality and protection and an exceptionally easy application process.  EXO works on very wide range of substrates including paint, gel coat, glass, metal, fabric, stone and perspex.

Based on the next generation of inorganic-organic hybrid materials it embodies our goal to offer products that work harder and smarter meaning more time enjoying your car, boat, plane or RV and less time maintaining it.

Glass bottle with tamper evident cap, air replaced with inert gas (once opened contents must be used within 2 weeks), QR code on exterior to guide users to application video

The Kit contains  nitrile gloves and 20x20cm micro suede application cloth

Application
Tip onto application cloth, spread over maximum of 2 small or one large panel and buff away residue.  Once applied repeat immediately for a second coat

It takes 3 hours to cure.

 Application Instructions

    EXO can be applied as a standalone sealant or as a top layer for Gtechniq C1 Crystal Lacquer (we recommend applying C1 Crystal Lacquer as a base coat for easy to mark and dark paints)
    If you are applying over C1, EXO should be applied more than 3 hours but less than 12 hours after you finish the C1 application
    In addition to this kit you will need at least two Microfibre Buff cloths
    Ensure that your vehicle is out of direct sunlight but warmer than 5c, is completely dry and will stay dry for at least 3 hours after application
    Remove all blemishes from your vehicle's paintwork
    Wipe down all surfaces using Gtechniq Panel Wipe and a Microfibre Buff Cloth  (nb if you are applying over a freshly applied coating of C1 you do not need to do this step)
    Put on the nitrile gloves provided
    Fold the micro-suede cloth into a small square
    Tip several drops of EXOv2 onto your application pad
    Spread the coating over an entire panel ensuring full coverage
    As soon as you have spread the coating over a single panel fold your first MF1 twice to form a square, spread and remove most of the residue using a light touch to ensure you do not introduce any marring to your finish
    With your second folded cloth remove all remaining residues.  We advise to move your head so that you get direct and oblique views of your finish to spot all residue and we recommend bright but flat lighting to make residue spotting easier
    Once you have finished coating your vehicle, repeat so that your vehicle is coated twice
    Allow the coating to cure for at least 3 hours
    For maintaining your finish we recommend hand washing your vehicle using a Gtechniq WM1 Australian Long Hair Merino Wash Mitt, Gtechniq G-Wash and a Gtechniq MF2 Zero Scratch Microfibre Drying Towel
    You will find that your vehicle is significantly easier to clean and whilst EXOv2 has significantly better resistance to caustic wash chemicals these chemicals will shorten the lifespan of any coating and are not recommended as part of your care routine
    EXOv3 can be over coated with other products but please note that if done you will get the surface performance of this product rather than those of EXOv3

Please note: This is a professional use product only and should not be applied by anyone without proper training.

30ml Bottle

Technical Specifications

  • Weight
    0.9kg
  • Product Code
    gt-exov230ml
  • Brand
    Gtechniq