Blackfire Scratch Resistant Clear Finishing Polish

Blackfire Scratch Resistant Clear Finishing Polish

Product Code: bfscr
Stock Status: In Stock
£29.90

Product Information

Blackfire Scratch Resistant Clear Finishing Polish uses nano abrasives to remove 2500-3000 grit sanding marks on fresh paints and to correct mild imperfections on cured paints. These fine abrasives burnish the finish to an incredible gloss. Blackfire Scratch Resistant Clear Finishing Polish can be used to refine the paint after compounding or as a one-step shine enhancing polish.

  • It will restore gloss and remove minor defects in nano, ceramic particle clear coats
  • It will restore gloss and remove minor defects in the new scratch-resistant clear coats
  • It can be applied by hand, dual action polisher or rotary polisher. (Machine application is required for maximum defect removal in ceramic particle clear coats.)

Blackfire Scratch Resistant Clear Finishing Polish will remove any existing wax or sealant and burnish the finish to a mirror-like shine. Applied by machine, it will remove 2500 grit swirls, spots, and scratches without hazing the finish.

Directions

Via hand:
Work on areas of 2 sq. ft., out of direct sunlight.
For best results, apply with a Microfiber Applicator.
Apply a pea sized amount of polish to the pad.
Mist the pad once with pad lubricant or water.
Wipe polish over surface using short, firm, strokes until polish starts to dry.
Allow a haze to form.
Buff off residues by hand using a Microfibre cloth

Via dual-action machine polisher:
Work on approximately 2 sq. ft. areas out of direct sunlight.
Apply using a Polishing Pad (or a  finishing pad if you're looking for less cut).
Mist pad once with lubricant or water.
Apply an X line of polish on the pad.
Using the foam pad, spread polish over the surface with the machine off. (This coats both the pad and the surface with polish.)
Set the speed control between 4 and 5.
Place foam pad on the paint and turn the polisher on.
Work over the surface in an overlapping back and forth motion until polish starts to turn clear.
Buff off residues by hand using a Microfibre cloth.

Via rotary polisher:
Work on areas of approximately 2 sq. ft. out of direct sunlight.
Apply using a Polishing Pad (or a finishing pad if you're looking for less cut).
Mist pad once with lubricant or water.
Apply an X of polish on the pad.
Using the foam pad, spread polish over the surface with the machine off. (This coats both the pad and the surface with polish.)
Set the speed control at 1,000 rpm.
Place foam pad on the paint and turn the polisher on.
Work over the surface in an overlapping back and forth motion until polish starts to turn clear.
Buff off residues by hand using a Microfibre cloth.

16 oz Bottle

Technical Specifications

  • Weight
    0.5kg
  • Product Code
    bfscr
  • Brand
    Blackfire